CERSE Italia Fire Alarm panle 2 zone with batteries

The FGZ is a reliable and straightforward conventional fire alarm control panel available in 1, 2, and 4-zone configurations — ideal for small to medium-sized buildings requiring a cost-effective, easy-to-operate fire detection and notification solution. Each zone supports up to 50 devices, including smoke detectors, heat detectors, and manual call points.

Intelligent Alarm Confirmation
To minimise false alarms, the FGZ provides up to 120 seconds of configurable delay time after an initial alarm signal is received, allowing personnel to verify whether a real fire condition exists before full evacuation is triggered. The panel clearly distinguishes between first fire alarm and subsequent alarm events through detailed status indicators.

Comprehensive Monitoring & Control
All input and output devices are continuously monitored by the panel. Zones and sounders can be individually disabled for maintenance, and the panel automatically disconnects any zone or sounder circuit detected as short-circuited. A mains-lost silence mode is also available, preventing nuisance fault signals during planned power interruptions.

Key Specifications

• Main Power: AC220V ±15%, 50Hz / AC110V ±15%, 60Hz
• Zone Voltage: 24V ±2V | Zones: 1, 2, or 4
• Zone Capacity: Up to 50 devices per zone
• End-of-Line Resistors: 3.9KΩ, 1W
• Zone Alarm Current: >20 mA | Short Current: >11 mA
• Sounder Output: 3 groups × 300 mA max / 24VDC
• Auxiliary Supply: 300 mA / 24V
• Battery Backup: 2 × 12V 3.3Ah (24VDC)
• Fault Relay Contacts: Rated 0.5A SELV
• Humidity: ≤95% RH
• Dimensions: 290 × 87.5 × 211.5mm | Weight: 2,100g (without battery)